Solar panel ground mounting systems of single post
This solar mounting system CY-ZJ15 is a single post solar racking system and can also be connected with foundation of concrete foundation, driven pile and ground screw. 40% of the components(Vertical rail, cross rail1 and cross rail2 ) are pre-assembled at factory.
The site work of this mounting system will be
1)Done the foundation work;
2)Connect pile to foundation(This step can be removed if the foundation driven pile);
3)Open the folded structure(Pre-assembled components);
4)Connect folded structure to pile;
5)Install rail;
6)Fix modules by middle and end clamp. Also 5-6 steps at site without drilling, welding and on-site fabrication. The middle and end clamp are adjustable which can fit all types of framed modules. For thin film module, we also have specific clamps.

Components:
Folded StructureMiddle Clamp
End ClampRail Connector
RailRammed Post
Certification:

Sample Picture:
Transportation service:
CY Solar provides all trade terms, FOB, CIF, DAP and even DDP to simplify customers'work.
After-sales service:
CY Solar promises quick feedback in 24 hours after getting email. And installation manual provided, and even engineers go to site conduction if possible.

FAQ:
1. If the land is not flat, how to adjust?
The current design of ground mount solar system can withstand land slop of less than 3 degrees. If it is larger than 3 degrees, there will be a adjustable connector.
2. If the project site is in typhoon/hurricane area, can this ground mount system resist?
For each project, we would like to have the wind and snow load of project site for structural calculation. Before designing, our engineers will calculate and use the relevant material to meet the project site conditions. wholesale Solar Racking Systems
website:http://www.cysolarrack.com/solar-mounting-systems/solar-racking-systems/